Hitech X2 Flash File Download:
Model Name : | Hitech X2 |
File Name: | Hitech X2 Firmware.pac |
File Size: | 3.25 MB |
Password: | takenologics |
How To Flash Hitech X2 Mobile:
Step 1: First Download Hitech X2 Mobile Firmware/ Flash File and Extract Files On Your Computer.
Step 2: Then Install Hitech X2 USB Driver On Your Computer, If You Already Have A USB Driver Installed (SKIP) Follow This Step. (SPD Driver)
Step 3: Open Hitech X2 Mobile Flash Tool. (SPD Upgrade Tool)
Step 2: Then Install Hitech X2 USB Driver On Your Computer, If You Already Have A USB Driver Installed (SKIP) Follow This Step. (SPD Driver)
Step 3: Open Hitech X2 Mobile Flash Tool. (SPD Upgrade Tool)
Step 4: Then Click Load Packet And Upload Hitech X2 Firmware/ Flash File (PAC/
Step 5: Press Start Button And Switch Off Your Hitech X2 Mobile And Wait At Least (5 Sec) And Connect USB Cable Using Boot Key.
Step 6: Now Hitech X2 Mobile Flash Processing Start, Now Wait At Least 5 Minutes.
Step 7: After Download Complete ON Your Computer Screen, Then Remove Hitech X2 Mobile USB Cable.
Step 8: Unplug Cable And Power ON Hitech X2 Mobile And Press Power Button Your Phone.
Step 9: Now Your Hitech X2 Mobile Is Complete.
Take A Backup: If you are going to flash the above Firmware on your Mobile device, then take a backup of everything Because your Data will be Deleted after Flashing the Stock Firmware.
0 Comments