OPPO A71 CPH1801 (2018) Firmware Official

Download the latest Oppo A71 (CPH1801) firmware as a preparation for the software repair on your smartphone. If today your smartphone is problematic with Bootloop, FRP, forgot your password, you can restore it using the official ROM.

I will give you a link of the OTA update file for you which can be installed recovery mode. As a solution to remove the password from the smartphone screen because you forgot, you can select the file with the tool and must be installed using the PC.

If your smartphone has a problem such as sluggish, full memory, the application stops, you can try restoring factory settings. This is a step that can be applied on all OPPO model smartphones.

Please download the firmware for your smartphone in preparation for the software repair. After this, you can save the file if it finishes installing and you can still use it for the same solution.

Version number: CPH1801EX_11_OTA_0210_all_l5GRAKFgpOco.ozip
Update Date: 15-08-2019
OTA Update via Recovery
Size: 2GB
DOWNLOAD

Version number: CPH1801EX_11_OTA_0200_all_VBdcWLo1Ail8.ozip
Update Date: 11-07-2019
OTA Update via Recovery
Size: 2GB
DOWNLOAD

Version number: CPH1801EX_11_OTA_0170_all_FHDPQFDhNdxw.ozip
Update Date: 18-04-2019
OTA Update via Recovery
Size: 2GB
DOWNLOAD

Version number: CPH1801EX_11_A.18_190426
Update via Tool
Size: 2GB
DOWNLOAD

OPPO_ALL_TOOL.rar
DOWNLOAD

How To Flash with SD Card and Recovery Mode Update:

1. Charge your OPPO smartphone to a battery level above 50%.

2. Save and download the firmware into the root document in your SD Card memory.

3. Insert your SD Card then turn off the smartphone.

4. Press and hold the Power button and the Volume Down button, until your phone enters Recovery Mode.

5. Under Recovery Mode select Install From Storage Device.

6. Next, you choose Install from SD and look for the updated firmware.

7. Select the firmware to install which you previously saved.

8. A confirmation message will appear on your screen, then just press Yes.

9. Your phone will reboot automatically and start updating the software.

10. The update process will take a few minutes and wait for success.

11. Finally, you can have REBOOT

How To Flash with MSMDownload Tool:

1. Extract the firmware that you downloaded and you will get a folder containing files and tools.

2. Now install the correct QcomMtk Driver on your PC.

3. Connect your smartphone to the PC with a USB cable.

4. Run MSM Download Tool and it will automatically load the firmware.

5. Click Start and wait for the flashing process to finish.

6. Unplug the smartphone from a USB cable and boot.