Download Realme 5 (RMX1911) Stock Firmware

Download Realme 5 RMX1911 original firmware as a preparation to flash as well as aim for repairs on your smartphone. If today your smartphone is problematic with Bootloop, FRP, forgot your password, you can restore it using the official ROM.

I will give you a file link for OTA updates and must be installed via recovery mode using SD card. As a solution to remove the password from the smartphone screen because you forgot, you can select the file with the Tool and must be installed using the PC.

If your smartphone has a problem such as sluggish, full memory, the application has stopped, you can try to restore factory settings. This is a step that can be applied on all smartphones Realme models. However, if you intentionally ROOT your smartphone, you can restore it by installing an official ROM.

Please download the firmware for your smartphone in preparation for any software repair. After this, you can save the file if it is finished installing and you can still use it for the same solution.

Version number: RMX1911EX_11_OTA_0150_all_jzKjYWTb3tvE. Or zip
Update Date: 16-10-2019
OTA Update via Recovery
Size: 2,5GB
DOWNLOAD

Version number: RMX1911_11_A. 11_190809_42f73526. rar
Update via Tool
Size: 4GB
DOWNLOAD

Flashing with SD Card and Recovery Mode Update:

1. Charge your Realme smartphone to a battery level above 50%.

2. Save and download the firmware into the root document in your SD Card memory.

3. Insert your SD Card then turn off the smartphone.

4. Press and hold the Power button and the Volume Down button, until your phone enters Recovery Mode.

5. Under Recovery Mode select Install From Storage Device.

6. Next, you choose Install from SD and look for the updated firmware.

7. Select the firmware to install which you previously saved.

8. A confirmation message will appear on your screen, then just press Yes.

9. Your phone will reboot automatically and start updating the software.

10. The update process will take a few minutes and wait for success.

11. Finally, you can have REBOOT

Flashing with MSMDownload Tool:

1. Extract the firmware that you downloaded and you will get a folder containing files and tools.

2. Now install the correct QcomMtk Driver on your PC.

3. Connect your smartphone to the PC with a USB cable.

4. Run MSM Download Tool and it will automatically load the firmware.

5. Click Start and wait for the flashing process to finish.

6. Unplug the smartphone from a USB cable and boot.