Download OPPO Reno2 F (CPH1989) Firmware Free

Download the latest firmware Oppo Reno2 F (CPH1989) for software repair support, stuck on the logo, FRP, unlock password. Flashing is an easy way for you to make and repair your smartphone in some cases. I'll try to give some firmware options for you accordingly from your smartphone model.

Among them, you can select the OTA update file and this you can make a file for recovery using SD card. As a workaround to solve the password problem, you can select the file with the tool and it is already available in the firmware package.

As the first one you can do before flashing, you can try restoring the manufacturer's settings on your smartphone through recovery mode. This can be applied to solutions when your smartphone is less responsive, or slow down to apps and more.

However, if your smartphone is already in ROOT condition, you can fix it by installing the official firmware. Now you can choose which file you want to use.

Version number: CPH1989EX_11_OTA_0100_all_Ya2349XbZE0f.ozip
Update Date: 11-06-2019
OTA Update via Recovery
Size: 3GB
DOWNLOAD

Version number: CPH1989EX_11_OTA_0080_all_lczXHiTBHMni.ozip
Update Date: 10-14-2019
OTA Update via Recovery
Size: 2,5GB
DOWNLOAD

Version number: CPH1989EX_11_A.08_190924_e82cc6bd.rar
Update via Tool
Size: 5GB
DOWNLOAD

Flashing with SD Card and Recovery Mode Update:

1. Charge your OPPO smartphone to a battery level above 50%.

2. Save and download the firmware into the root document in your SD Card memory.

3. Insert your SD Card then turn off the smartphone.

4. Press and hold the Power button and the Volume Down button, until your phone enters Recovery Mode.

5. Under Recovery Mode select Install From Storage Device.

6. Next, you choose Install from SD and look for the updated firmware.

7. Select the firmware to install which you previously saved.

8. A confirmation message will appear on your screen, then just press Yes.

9. Your phone will reboot automatically and start updating the software.

10. The update process will take a few minutes and wait for success.

11. Finally, you can have REBOOT

Flashing with MSMDownload Tool:

1. Extract the firmware that you downloaded and you will get a folder containing files and tools.

2. Now install the correct QcomMtk Driver on your PC.

3. Connect your smartphone to the PC with a USB cable.

4. Run MSM Download Tool and it will automatically load the firmware.

5. Click Start and wait for the flashing process to finish.

6. Unplug the smartphone from a USB cable and boot.