Realme 2 Pro RMX1801/RMX1807 Firmware Official

Download the official Realme 2 Pro RMX1801/RMX1807 firmware of Flash support and repair software on your smartphone. If your smartphone has problems sticking to the logo, this will be the file for system recovery. In addition, the best solution to solve the problem of forgetting your password, FRP, can be flashed using this official Rom.

In this post, you'll find some firmware options and you can define for yourself. You can select the OTA update file for recovery using SD card. As a solution to solve the password problem because you forgot, you can choose the file with the tool and it's already in the firmware package.

If your smartphone has a bootloop issue, software performance is slow, you can try it by restoring the manufacturer's settings to start deleting all the data. This is a step that can be applied to all Realme smartphones. However, if your smartphone is in your ROOT condition, you can finish it by installing the official ROM.

Now you can download the firmware you want in preparation for the update. After this, you can set your own Flash steps according to your knowledge.

Version number: RMX1801EX_11_OTA_0240_all_HRfI3IQiI3cB. zip
Update Date: 09-04-2019
OTA Update via Recovery
Size: 2,68GB
DOWNLOAD

Version number: RMX1801EX_11_A.21_190602_ofp. zip
Update via Tool
Size: 4GB
DOWNLOAD

Version number: RMX1801EX_11_A17_190315_78fc8cc6. zip
Update via Tool
Size: 4GB
DOWNLOAD

Version number: RMX1807EX_11_A21_190602.zip
Update via Tool
Size: 4GB
DOWNLOAD

Version number: RMX1807_11_A05_180926_QFIL.zip
Update via Tool
Size: 4GB
DOWNLOAD

Flash with SD Card and Recovery Mode Update:

1. Charge your Realme smartphone to a battery level above 50%.

2. Save and download the firmware into the root document in your SD Card memory.

3. Insert your SD Card then turn off the smartphone.

4. Press and hold the Power button and the Volume Down button, until your phone enters Recovery Mode.

5. Under Recovery Mode select Install From Storage Device.

6. Next, you choose Install from SD and look for the updated firmware.

7. Select the firmware to install which you previously saved.

8. A confirmation message will appear on your screen, then just press Yes.

9. Your phone will reboot automatically and start updating the software.

10. The update process will take a few minutes and wait for success.

11. Finally, you can have REBOOT

Flash with MSMDownload Tool:

1. Extract the firmware that you downloaded and you will get a folder containing files and tools.

2. Now install the correct QcomMtk Driver on your PC.

3. Connect your smartphone to the PC with a USB cable.

4. Run MSM Download Tool and it will automatically load the firmware.

5. Click Start and wait for the flashing process to finish.

6. Unplug the smartphone from a USB cable and boot.