Download Realme C1 (RMX1811) Official Firmware

Download the official Realme C1 (RMX1811) firmware for software repair support on your smartphone. You can use this firmware for some benefit. That is, resolve the problem because it hangs on the logo, unlock the password and remove the FRP.

Doing Flash is one way to repair your smartphone in some cases and not just that. Not only because of the software, but also some of them such as errors, the application is unresponsive. If this is the case on your smartphone, it is possible to try to finish it by restoring the factory settings or hard reset.

In this post I'm just going to give you some firmware options for flash and updates. Among them, you can select an OTA update file for you to use in recovery with an SD card through recovery mode. If you want a solution about a password problem because you forgot, you can select the file with the tool and it's already in the firmware package.

Now you can download the firmware you need to set up or flash update. Once you have the files, you can set your own Flash steps according to the ROMS you already have. Regarding the guide to flash you can also find it and maybe it can help you.

Version number: RMX1805EX_11_OTA_0610_all_UJ4uxjdEOvf2
Update Date: 10-10-2019
OTA Update via Recovery
Size: 2GB
DOWNLOAD

Version number: RMX1811_11_A. 26_190516_3f98db66. zip
Update via Tool
Size: 5GB
DOWNLOAD

Version number: RMX1811_11_A. 23_190112_340523e6. zip
Update via Tool
Size: 4GB
DOWNLOAD

Version number: RMX1811_11_A. 14_180929_QFIL. zip
Update via Tool
Size: 4GB
DOWNLOAD

Flash with SD Card and Recovery Mode Update:

1. Charge your Realme smartphone to a battery level above 50%.

2. Save and download the firmware into the root document in your SD Card memory.

3. Insert your SD Card then turn off the smartphone.

4. Press and hold the Power button and the Volume Down button, until your phone enters Recovery Mode.

5. Under Recovery Mode select Install From Storage Device.

6. Next, you choose Install from SD and look for the updated firmware.

7. Select the firmware to install which you previously saved.

8. A confirmation message will appear on your screen, then just press Yes.

9. Your phone will reboot automatically and start updating the software.

10. The update process will take a few minutes and wait for success.

11. Finally, you can have REBOOT

Flash with MSMDownload Tool:

1. Extract the firmware that you downloaded and you will get a folder containing files and tools.

2. Now install the correct QcomMtk Driver on your PC.

3. Connect your smartphone to the PC with a USB cable.

4. Run MSM Download Tool and it will automatically load the firmware.

5. Click Start and wait for the flashing process to finish.

6. Unplug the smartphone from a USB cable and boot.